Lean-to roofs
A lean-to roof is a single slope off a wall. A kit runs from 2.5 to 10 m wide and 1.5 to 4 m out, in 16 mm sheet. Wall-mounted polycarbonate kits are €1,520–€9,660, supply only.
One slope off a wall: the fall it needs, what it fixes to and which sheets suit it.
No charge and no obligation. Only one fitter in your county ever sees your request.
- 2.5–10 mkit widths
- 1.5–4 mhow far out
- 5°the lowest fall
- from €1,520a wall-mounted kit

One slope, three parts
A lean-to roof is the wall plate, the rafters and the sheets. The plate is bolted to the wall at the top. The rafters run from it to a beam on posts at the front. The sheets sit on the rafters, and the whole roof falls away from the house, by at least 5 degrees.
Price your roof
Four taps, and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.
A pergola with a polycarbonate roof, about 3 × 4 m, against the house: From €3,230, supply only.
How the price is worked out
The figure is what that roof and size sells for in Ireland now, with VAT included where the seller says so. Where sellers differ, you see the lowest and the highest. A kit price is for the kit delivered, not fitted. Fixed polycarbonate and glass roofs are sold by the kit and shown as a starting price, supply only. A base, electrics, lights and heaters are not in any of them, because they depend on your garden. Use it to plan with. It is not a quote: a fitter prices yours after seeing where it goes.
Getting the fall right
With 5 degrees the water runs. With less, it pools and the joints leak. Measure up from the lowest point under the wall flashing, and check that the front beam sits low enough to give the slope. A low house wall with a high window limits how much fall is available.
The gutter sits along the low front edge. The outlet runs to a drain or soakaway, at least 5 m from buildings. Roof drainage and gutters.
Sheet, glass or tile
Polycarbonate suits most lean-tos, because it is light. At 16 mm a sheet spans 1050 mm between rafters. Glass costs more and needs a heavier frame.
Other roofs to look at
Lean-to pergolasA frame of two posts and the back wall of the house.
Polycarbonate roofsSheet thickness, rafter spacing, fixing and cost a square metre.
Patio coversA fixed cover over the patio you already have.
Roof drainage and guttersWhere the water goes, and what the outlet runs to.
Glass roofsLaminated safety glass on an aluminium frame, and what it adds to the price.
CarportsA roof for a car, with prices by size.Questions before you buy
What is a lean-to roof?
A roof with a single slope, fixed to a wall at the high side and held on posts or a wall at the low side.
How steep should a lean-to roof be?
At least 5 degrees for sheet roofs.
How much is a lean-to roof kit?
A lean-to roof is a single slope off a wall. A kit runs from 2.5 to 10 m wide and 1.5 to 4 m out, in 16 mm sheet. Wall-mounted polycarbonate kits are €1,520–€9,660, supply only.
Does a lean-to roof need planning permission?
Class 3 lists tents, awnings, shades, greenhouses, garages, stores and sheds. A roof attached to the house and walled in at the sides looks more like an extension, which falls under a different class with a 45 m² limit. Only the council can say which one applies, so ask it before you order.
Everything on this site
Roofs
Where a roof goes

Your roof, priced before anyone calls
Choose the roof, give a size and say where it stands. A firm quote comes from a single pergola fitter in your county, once you ask for one.
